R4600 أنديميل ثقب 4 ريشة 8 % كوبلت مقاس16.0مم

D mm

d mm

L mm

l mm

6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)

6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2)

Alloys Al-Mg Si > 10%

1.1 Construction / Carbon Steel (<250 HB / <850 N / mm2)

1.1 Construction / Carbon Steel (<250 HB / <850 N / mm2)

3.2 Cast Iron (200-300 HB / 700-1000 N/mm2)

5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)

D mm	8.00
d mm	10.00
L mm	61.00
l mm	11.00
6.1 Al-Mg non-alloyed (<100 HB / <350 N/mm2)	Feed (mm/rev.) 0,025 Cutting Speed (m/min.) 160-200
6.2 Al-Mg Si < 10% Alloy (<180 HB / <600 N/mm2)	Feed (mm/rev.) 0,025 Cutting Speed (m/min.) 160-200
Alloys Al-Mg Si > 10%	(<180 HB / <600 N/mm2)
1.1 Construction / Carbon Steel (<250 HB / <850 N / mm2)	Feed (mm/rev.) 0,050 Cutting Speed (m/min.) 30-40, Feed (mm/rev.) 0,035 Cutting Speed (m/min.) 20-30
3.2 Cast Iron (200-300 HB / 700-1000 N/mm2)	Feeding (mm / cycle) 0.050 Cutting speed (m / min) 15-20
5.1 Short Chip Copper-Bronze-Brass (<200 HB / <700 N/mm2)	Feed (mm / rev.) 0,050 Cutting Speed (m / min.) 60-100